Product Images

  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
PDF  | Print |

 

GETTING THE BEST OUT OF YOUR ROTOTANK TANK

Place your RotoTank tank on a flat level surface.

  • A solid wooden platform, smooth concrete plinth or smooth level bed of river sand is best.
  • Increase the tank’s useful life by reducing the direct hours of sunlight to which the RotoTank tank is exposed.
  • Positioning the RotoTank tank in the shade of trees, under a lean-to on the south side of a building or under shade cloth are some of the ways of protecting your RotoTank tank from excessive sunlight (UV rays).

Avoid mechanical damage by:

  • Not lifting the RotoTank tank while it still has liquid in it.
  • Ensuring that hot exhaust gases do not impinge directly onto the RotoTank tank and hot exhaust pipes do not touch the RotoTank tank.
  • Ensuring that the RotoTank tank is not unnecessarily dropped and especially not onto it’s corners.
  • Ensuring that high stress loads are not applied to the RotoTank tank by lifting equipment or “tie-down” securing straps and ropes. Avoid the use of steel cables and wire for this purpose.
  • Storing only products that are compatible with the grade of Linear Low Density Polyethylene used for manufacturing your RotoTank tank. If in doubt, contact RotoTank for more advice.
  • Only use RotoTank approved flanges, pipe fittings and tank connections.
  • Modifications to RotoTank will negatively affect the warranty.

Reduce the temperatures to which the RotoTank tank is exposed by:

  • Cleaning the area around your RotoTank tank to prevent fire damage.
  • Not storing hot product (above 80° C) in your RotoTank tank for long periods of time. Where service temperature exceeds 40° C the supplier should be consulted. However, the RotoTank tanks can be steam cleaned with atmospheric steam.
  • Keeping the RotoTank tank full of water when it is not being used for storing other liquids reduces the surface temperatures of the plastic and extends its life.